mvj
Advanced Member level 4
Hi,
I have phase noise numbers of a clock signal.
e.g.
PLL_freqOffset = [1e3 10e3 100e3 500e3 1e6 10e6];#[Hz] offset freq. from VCO freq.
PLL_PNdata = [-40 -45 -50 -55 -60 -120];%phase noise [dBc/Hz]
I would like to add this a 100MHz sine wave clock source:
Fs = 1e9; % Sampling frequency
T = 1/Fs; % Sampling period
L = 1500; % Length of signal
t = (0:L-1)*T; % Time vector
S = 1*sin(2*pi*100e6*t);
S_withAddedPN = S + "PhaseNoise"
Not sure how to add this "PhaseNoise". Any suggestions would be of great help.
Thank you,
mvj
I have phase noise numbers of a clock signal.
e.g.
PLL_freqOffset = [1e3 10e3 100e3 500e3 1e6 10e6];#[Hz] offset freq. from VCO freq.
PLL_PNdata = [-40 -45 -50 -55 -60 -120];%phase noise [dBc/Hz]
I would like to add this a 100MHz sine wave clock source:
Fs = 1e9; % Sampling frequency
T = 1/Fs; % Sampling period
L = 1500; % Length of signal
t = (0:L-1)*T; % Time vector
S = 1*sin(2*pi*100e6*t);
S_withAddedPN = S + "PhaseNoise"
Not sure how to add this "PhaseNoise". Any suggestions would be of great help.
Thank you,
mvj